Elastomeric Load Bearing Pads Canada

Vibsorb Elastomeric ROF Bearing pads are in stock and available for expedited processing and shipping!

Call 800-580-4195 for more information

Vibsorb ROF Pad

Vibsorb ROF Elastomeric Pad

Vibsorb ROF load Bearing Pads are made of fully cured masticated fiber reinforced rubber made from a proprietary blend of virgin and recycled rubbers. During the manufacturing process, synthetic fibers are added to the base rubber compounds to create an internal stiffening – much like reinforced concrete. This mesh structure delivers enhanced tensile, compressive strength, stiffness, tear resistance, durability, and superior ozone and weather resistance.

Elastomeric Pad Mechanical Properties

Properties Tested ASTM Test Method Value
Hardness Shore "A" ASTM D2240 80 +- 10
Tensile Strength ASTM D412 Machine Direction: 951 PSI
Tensile Strength ASTM D412 Machine Direction: 951 PSI min
Elongation (%) ASTM D412 Machine Direction: 15% min
Tear Strength (lbs/in) ASTM D624 Machine Direction: 200 min
Low Temperature Resistance @ -40C D1894 PASS
Heat Aging D573 70 hrs @70C, Changed:
Hardness +- 10 points
Tensile =- 25% max
Elongation =- 25% max
Ultimate Compressive Strength 8,000 PSI

Benchmark accepts no responsibility for individual results obtained. Everyone is strongly recommended to verify data and obtain their own independent test results. This data is subject to change without notice.

Vibsorb Elastomeric ROF pad is available in the following thickness 1/4", 1/2", 3/4", 1" and 2". Additional thickness and custom fabrication is available upon request.

Benchmark stocks elastomeric bearing pad material the following dimensions in Canada:

Elastomeric Pad Thickness Sheet Dimensions Roll Dimensions
1/4" (6.35mm) 48" (1219mm) x 60"(1524mm) 48" (1219mm) x 300' (91.5 meter)
1/2" (12.7mm) 48" (1219mm) x 60"(1524mm) 48" (1219mm) x 75' (22.86 meter)
3/4" (19mm) 48" (1219mm) x 60"(1524mm) N/A
1" (25.4mm) 48" (1219mm) x 60"(1524mm) N/A
2" (50.8mm) 48" (1219mm) x 60"(1524mm) N/A

Vibsorb Elastomeric ROF Pads are also available in cut to size pieces including holes, slots and other finishing requests. Benchmark also stocks the engineer approved epoxy system for bonding Vibsorb to a variety of surfaces including concrete, steel, PTFE and composite materials.

Contact Request Form