Waffle Pads are manufactured from nitrile rubber in a range of types and thicknesses that allows for optimal loading and isolator performance. The “waffle” shape pad, Waffle Pads are specifically designed to maintain the proper shape factor for the pads when under load. For higher loads we can add a steel shim to further maintain shape factor.
Available in variety of densities please see the below table.
| Model | Maximum load (PSI) | Dimensions (Inches) | Thickness (Inches) |
|---|---|---|---|
| WP-25 | 25 | 18" x 18" | 5/16" |
| WP-50 | 50 | 18" x 18" | 5/16" |
| WP-100 | 100 | 18" x 18" | 5/16" |
| WP-200 | 200 | 18" x 18" | 1/2" |
| WP-300 | 300 | 18" x 18" | 1/2" |
Benchmark accepts no responsibility for individual results obtained. Everyone is strongly recommended to verify data and obtain their own independent test results. This data is subject to change without notice.
Pick the model by the load each pad carries. Divide the machine weight by the number of pads, then divide by the area of one pad to get the load in psi, and choose a model with a maximum load above that value.
Example: a 4,000 lb machine on four 18″ x 18″ pads puts 1,000 lb on each pad. One pad is 324 sq in, so the load is about 3.1 psi and a WP-25 pad is suitable. For the best isolation, size the pads so the load sits within the model’s working range; lightly loaded pads can be cut smaller.
Call 800 580 4195 or use the form below.