Canada flag
United States flag

Stainless Steel Hardware Canada

Benchmark supplies stainless steel bolts, studs, nuts and washers across Canada, alongside the thermal break and vibration control products they are used with. Stainless hardware is the usual choice wherever steel connections are exposed to weather, moisture or corrosive conditions, and wherever a fastener passes through a structural thermal break.

Stainless hardware we supply

Ordering

Send us the bolt diameter, length, grade and quantity, or your connection drawings, and we’ll quote the full package of hardware, thermal break pads and washers so everything arrives together.

Call 800-580-4195 or use the form below and we’ll get back to you quickly.

Why Use Stainless Hardware Through a Thermal Break

A bolt that passes through a structural thermal break is a small heat path of its own. Stainless steel conducts heat at roughly a third of the rate of carbon steel, so stainless bolts reduce the heat that bypasses the thermal break pad. It also resists corrosion where condensation can form on the cold side of the connection.

For the best result, pair the bolts with STB-1 thermal break washers and bushings, which separate the bolt from the steel on both sides and break the remaining heat path.

Choosing the right hardware

  • Match the materials – use nuts and washers of the same alloy as the bolts to avoid galvanic corrosion
  • Check the grade – ASTM A193 B8 Class 2 is strain hardened 304 stainless for higher strength than standard stainless bolts
  • Size the bushings to the bolt – bushings should fit the bolt diameter and the thickness of the connected plies
  • Allow for the pad thickness – bolt length must include the thermal break pad and washers

Lead time

Typical lead time for A193 B8 Class 2 hardware is 18–25 days, often faster than other suppliers. Call 800 580 4195 or use the form below.