Vibsorb Vibration Absorption Pads Canada

Vibsorb Vibration Absorption Pads are in stock and available for expedited processing and shipping!

Call 800-580-4195 for more information

Vibsorb Vibration Absorption Bearing pads are a layered rubber and cotton duck fabric bearing that can be used in a wide variety of structural bearing applications. They go by many names such as Fabric Bearings, Preformed Fabric Bearings, Cotton Duck Pads and Cotton Duck Bearings. They can have a sliding surface of PTFE and stainless steel for a Sliding Expansion Bearing or can be plain without sliding surfaces. These bearings are well suited when very little relative rotation can be expected (equal to or less than 0.003 radians) and where they will sustain no more than 2500 psi of compressive stress.

Except for Sliding Expansion Bearings (where movement is accommodated by the sliding PTFE/Stainless surface), they are not well suited if the movement is expected to be accommodated by shear of the fabric pad.

Vibsorb Vibration Absorption Pad with PTFE

Vibsorb Vibration MIL C Spec:

The bearing pads shall be manufactured of all new (unused) materials and composed of multiple layers of prestressed 50/50 cotton-polyester blend duck, 8.1 ounce per net square yard, duck warp count 50 ± 1 threads per inch and filling count 40 ± 2 threads per inch, impregnated and bound with a high quality, oil-impervious nitrile rubber compound, containing rot and mildew inhibitors and anti-oxidants, compounded into resilient pads of uniform thickness. The pads shall withstand compressive loads perpendicular to the plane of laminations of not less than 10,000 psi before breakdown.

Vibsorb Vibration Absorption Pad Mechanical Properties

Properties Tested	ASTM Test Method	Value
Hardness Shore "A"	ASTM D2240	90 +- 5
Tensile Strength	ASTM D412	5,500 PSI
Ultimate Elongation	ASTM D412	600%
Specific Gravity		1.21
Compressive Load		10,000 PSI
Shear Modulus		450 PSI
Modulus of Elasticity		23,000
Temperature Range		-20F to +200F

Benchmark accepts no responsibility for individual results obtained. Everyone is strongly recommended to verify data and obtain their own independent test results. This data is subject to change without notice.

Physical Properties:

Color: Black with white fabric layers

Finish = Smooth

Elastomer Type = Nitrile

Fabric type = Cotton with Polyester

Fungal resistant

Meets the following Specifications:

D.O.T. Federal Standard Specifications for Construction Administration: of Roads and Bridges on Federal Highway Projects (1985).

AASHTO: Standard Specifications for Highway Bridges.

Preformed Fabric Pads: 16th Edition – 18.10.2 17th Edition – 18.4.9.1 2nd ED.LRFD – 18.10.2

Military Specifications

MIL-C-882, MIL-E-5272A , MIL-STD-810

Vibsorb is a high capacity preformed cushioning pad fabricated using multiple layers of high quality cotton polyester duck fabric, completely impregnated with a high-grade nitrile compound. Finished Vibsorb Vibration Absorption pads will withstand compressive loads perpendicular to the plane of laminations of 10,000 pounds minimum per square inch without detrimental reduction in thickness or extrusion.

Benchmark stocks Vibsorb Vibration Absorption Pad pad material the following dimensions in Canada:

Elastomeric Pad Thickness	Sheet Dimensions	Roll Dimensions
1/16" (1.6mm)	48" (1219mm) x 96" (2438mm)	48" (1219mm) x 300' (91.5 meter)
1/8" (3.2mm)	48" (1219mm) x 96" (2438mm)	48" (1219mm) x 300' (91.5 meter)
15/64" (6mm)	48" (1219mm) x 96" (2438mm)	48" (1219mm) x 300' (91.5 meter)
11/32" (8.8mm)	48" (1219mm) x 96" (2438mm)	N/A
1/2" (12.7mm)	48" (1219mm) x 96" (2438mm)	N/A
3/4" (19mm)	48" (1219mm) x 96" (2438mm)	N/A
1" (25.4mm)	48" (1219mm) x 96" (2438mm)	N/A
2" (50.8mm)	48" (1219mm) x 96" (2438mm)	N/A

Vibsorb Vibration Absorption Pads are also available in cut to size pieces including holes, slots and other finishing requests. Benchmark also stocks the engineer approved epoxy system for bonding Vibsorb to a variety of surfaces including concrete, steel, PTFE and composite materials.

Contact Request Form

First Name *

Last Name *

Phone number *

Company name

City

State/Region

Country/Region

Email *

Message