Canada flag
United States flag

Cotton Duck Bearing Pad Calculator

Cotton duck (fabric-reinforced elastomer) bearing pads to MIL-C-882 carry high compressive loads in a thin pad, which makes them a common choice for steel and precast beam seats. Use this free calculator (beta) to check pad stress and rotation against Benchmark’s design guide and find the minimum pad area for your load.

Pad and loads

Results

CheckValueGuideResult

For preliminary sizing only. Design guide values from Benchmark’s published data: plain cotton duck (MIL-C-882) pads are best suited where design compressive stress is no more than 2,500 psi and relative rotation is no more than 0.003 radians; the pad is rated for compressive loads up to 10,000 psi. Where movement must be accommodated, use a PTFE / stainless sliding surface rather than shear of the fabric pad.

How the Calculator Works

  • Compressive stress = vertical service load ÷ pad area, checked against a design guide of 2,500 psi.
  • Minimum area = load ÷ 2,500 psi.
  • Rotation: plain cotton duck pads are best where relative rotation is no more than 0.003 radians. For more rotation, use an elastomeric or laminated bearing.
  • Movement: cotton duck pads are stiff in shear. Where the structure must move, add a PTFE / stainless steel sliding surface.

Benchmark’s MIL-C-882 cotton duck pads are in stock in Canada for delivery in 2–3 days.

Related design tools: PTFE Slide Bearing Calculator  ·  Elastomeric Bearing Pad Calculator  ·  Slide Bearing Material Selector  ·  Lead Time Estimator  ·  All engineering design tools

Products: Cotton duck (AASHTO) bearing pads  ·  PTFE slide bearings  ·  Bearing pads in stock

Request a Quote or Data Sheet

Send us your loads and pad sizes and we will quote cotton duck bearing pads, with or without bonded PTFE, cut to size in Canada. Call 800-580-4195 or use the form below.

BETAResults are estimates only. Verify them with your engineer or designer before proceeding. Found an issue? Let us know.