Canada flag
United States flag

Galvanic Corrosion Calculator for Dissimilar Metals

When two different metals touch in the presence of moisture, the less noble metal corrodes. Use this free calculator (beta) to check whether a fastener and base metal, such as stainless bolts in galvanized or aluminum framing, are compatible in your environment, which metal will corrode, and how to isolate the joint.

Metals in contact

Result

Anodic index values (volts, gold = 0) and allowable differences (0.15 V harsh, 0.25 V normal, 0.50 V controlled) follow the widely published anodic index method. Values are approximate; moisture, temperature, chlorides and the area ratio of the two metals all affect the actual corrosion rate.

How the Calculator Works

  • Anodic index: each metal is given a voltage relative to gold. The bigger the difference between two metals, the stronger the drive for galvanic corrosion.
  • Allowable difference depends on the environment: about 0.15 V outdoors or in harsh conditions, 0.25 V indoors without climate control, and 0.50 V in controlled conditions.
  • Which metal corrodes: the metal with the higher anodic index (the less noble one).
  • Area ratio matters: a small anode on a large cathode, such as a galvanized bolt in stainless plate, corrodes fastest. A small noble fastener in a large anodic part is less severe.
  • Isolation: non-metallic washers, bushings and pads break the electrical path and stop the galvanic cell.

Related design tools: Bolt Length Calculator  ·  B8 Class 2 Bolt Torque Calculator  ·  Thermal Washer & Bushing Selector  ·  All engineering design tools

Products: Isolation washers and bushings  ·  Thermal break washers and bushings  ·  B8 Class 2 stainless bolts  ·  Stainless steel fasteners

Request a Quote or Data Sheet

Need to isolate dissimilar metals? We cut isolation washers, bushings and pads to size and supply stainless fasteners. Call 800-580-4195 or use the form below.

BETAResults are estimates only. Verify them with your engineer or designer before proceeding. Found an issue? Let us know.