Canada flag
United States flag

PTFE Slide Bearing Calculator

Use this free calculator (beta) to size a PTFE slide bearing: enter the vertical load, PTFE type and movement to get the PTFE pad size, actual contact pressure, the stainless steel plate size needed to keep the PTFE covered through its full travel, and the friction force the bearing passes into the supports.

Load and PTFE

Design pressure defaults to Benchmark's published maximum for the PTFE type. Enter a lower value if your specification or engineer requires one.

Movement and friction

Not sure of the movement? Use the Thermal Expansion Movement Calculator.

Bearing size

For preliminary sizing only. Maximum pressures and friction values are from Benchmark's published PTFE data: virgin PTFE up to 6.9 MPa non-recessed and 13.7 MPa recessed, glass-filled PTFE up to 18 MPa non-recessed and 50 MPa recessed; virgin PTFE dry friction static 0.05–0.08, dynamic 0.04–0.06 (ASTM D3028). Friction rises at low temperature and low pressure; use your design code's values for the friction force. The stainless mating surface is sized so the PTFE stays fully covered through its full travel. Rotation, anchorage and the supporting structure are not checked.

How the Calculator Works

  • PTFE area is the vertical service load divided by the design contact pressure. With the width set to suit the member, the length is rounded up to the next 1/4″.
  • Stainless plate: the upper (stainless) element is made larger than the lower (PTFE) element by the anticipated movement, so the PTFE stays uniformly loaded through its full travel and dirt is kept out of the sliding interface.
  • Friction force is the coefficient of friction × vertical load. This horizontal force must be resisted by the bearing anchorage and supports.
  • PTFE type: virgin PTFE gives the lowest friction; glass-filled PTFE carries more load and wears better. Recessing the PTFE raises the allowable pressure.

Related design tools: Thermal Expansion Movement Calculator  ·  Elastomeric Bearing Pad Calculator  ·  Vibration Isolation Calculator  ·  Specification Writer  ·  Epoxy Coverage Calculator  ·  Slide Bearing Material Selector  ·  Cotton Duck Bearing Pad Calculator  ·  Slotted Hole Calculator  ·  All engineering design tools

Products: PTFE slide bearings  ·  PTFE expansion bearings  ·  PTFE sheets

Request a Quote or Data Sheet

Send us your loads, movements and drawings and we will quote PTFE slide bearings and expansion bearings made in Canada. Standard designs ship in 10–12 days. Call 800-580-4195 or use the form below.

BETAResults are estimates only. Verify them with your engineer or designer before proceeding. Found an issue? Let us know.