Canada flag
United States flag

Laminated (Shimmed) Elastomeric Bearing Calculator

Use this free calculator (beta) for a preliminary design of a steel-reinforced laminated elastomeric bearing or shimmed bearing for bridges, buildings and heavy equipment. Enter the plan size, elastomer layers, steel shims, hardness, loads and movement to get the shape factor, total height, shear force and the AASHTO LRFD Method A checks for compressive stress, shear deformation, stability and shim thickness.

Bearing geometry

Bearing has n internal layers, two cover layers and n + 1 steel shims.

Loads and movement

Use the Thermal Expansion Movement Calculator to estimate movement.

Bearing summary

CheckValueLimitResult

For preliminary sizing only, following AASHTO LRFD Method A (Article 14.7.6) for rectangular steel-reinforced bearings without holes: compressive stress ≤ 1.25 ksi and ≤ 1.25 G S; cover layers no thicker than 70% of internal layers; total elastomer thickness at least twice the shear deformation; total height no more than one-third of the length or width; shim thickness hs ≥ 3 hmax σs ÷ Fy and hs ≥ 2 hmax σL ÷ ΔFTH with ΔFTH = 24 ksi. Shear modulus ranges by hardness are from AASHTO Table 14.7.6.2-1, using the least favourable value for each check. Rotation, anchorage, low-temperature and seismic checks are not included; check the edition of AASHTO or CSA S6 that governs your project.

How the Calculator Works

  • Shape factor S = L × W ÷ (2 × hri × (L + W)), using the internal layer thickness. Thinner layers raise the shape factor and the compressive capacity.
  • Total elastomer thickness hrt = internal layers + two cover layers. It must be at least twice the movement to keep shear strain within 50%.
  • Stability: the total height (elastomer + shims) must not exceed one-third of the least plan dimension.
  • Steel shims are checked for service stress and fatigue under live load.
  • Shear force on the supports is G × A × movement ÷ hrt, using the stiffest shear modulus for the hardness.

Benchmark makes laminated and shimmed bearings in natural rubber or neoprene, 50, 60 or 70 durometer, with standard designs in 10–12 days.

Related design tools: Elastomeric Bearing Pad Calculator  ·  Thermal Expansion Movement Calculator  ·  PTFE Slide Bearing Calculator  ·  Specification Writer  ·  All engineering design tools

Products: Laminated elastomeric bearings  ·  Neoprene bearing pads  ·  Natural rubber bearings

Request a Quote or Data Sheet

Send us your loads, movements, rotations and drawings and we will design and quote laminated and shimmed elastomeric bearings made in Canada. Call 800-580-4195 or use the form below.

BETAResults are estimates only. Verify them with your engineer or designer before proceeding. Found an issue? Let us know.