Canada flag
United States flag

Thermal Washer & Bushing Selector

Use this free selector (beta) to size STB-1 thermal washers and Thermal Bushings for a bolted connection. Pick the bolt diameter, enter the number of holes and the plate thicknesses, and get Benchmark’s recommended washer and bushing sizes in inches and millimetres, the hole size the steel needs, and a part list you can copy into a quote request.

Inputs

Recommended sizes

Part list

 

Sizes are Benchmark's recommended thermal washer and Thermal Bushing sizes. A typical STB-1 washer and bushing system uses 2 thermal washers, 2 Thermal Bushings and 4 USS flat washers per hole. Thermal Bushings are cut to suit your plate thicknesses and confirmed when we quote.

How the Selector Works

  • Sizes come from Benchmark’s recommended thermal washer and Thermal Bushing chart for bolts from 3/16″ (M5) to 1″ (M25).
  • Quantities follow the typical STB-1 system: 2 thermal washers, 2 Thermal Bushings and 4 USS flat washers per hole.
  • Hole size: the Thermal Bushing sits in the hole, so holes in the steel must clear the bushing OD.
  • Grip is plate 1 + STB-1 pad + plate 2, a check for bolt length.

Thermal washers and bushings at the bolts reduce heat loss through the connection and help prevent condensation on bolt heads on the warm side of the structure.

Related design tools: Thermal Break Calculator  ·  Thermal Break Heat Loss & Savings Calculator  ·  Condensation & Dew Point Checker  ·  TBF Grade Selector  ·  All thermal break tools  ·  Bolt Length Calculator  ·  All engineering design tools

Products: STB-1 Structural Thermal Break  ·  TBF High Density Thermal Break  ·  Thermal break washers and bushings

Request a Quote or Data Sheet

Send us your connection drawings, bolt schedule or load requirements and we will quote STB-1, TBF, washers and Thermal Bushings cut and machined to your specification. Call 800-580-4195 or use the form below.

BETAResults are estimates only. Verify them with your engineer or designer before proceeding. Found an issue? Let us know.